ATmega328P DIY arduino Learning Kit FT232RL 22pF 100nF 16MHz crystal mini breadboard

$15.00

Description

Want create site? Find Free WordPress Themes and plugins.
Introduction
The Atmel® picoPower® ATmega328/P is a low-power CMOS 8-bit
microcontroller based on the AVR® enhanced RISC architecture. By
executing powerful instructions in a single clock cycle, the ATmega328/P
achieves throughputs close to 1MIPS per MHz. This empowers system
designer to optimize the device for power consumption versus processing
speed.
Feature
High Performance, Low Power Atmel®AVR® 8-Bit Microcontroller Family
• Advanced RISC Architecture
– 131 Powerful Instructions
– Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 20 MIPS Throughput at 20MHz
– On-chip 2-cycle Multiplier
• High Endurance Non-volatile Memory Segments
– 32KBytes of In-System Self-Programmable Flash program
Memory
– 1KBytes EEPROM
– 2KBytes Internal SRAM
– Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
– Data Retention: 20 years at 85°C/100 years at 25°C(1)
– Optional Boot Code Section with Independent Lock Bits
• In-System Programming by On-chip Boot Program
• True Read-While-Write Operation
– Programming Lock for Software Security
• Atmel® QTouch® Library Support
– Capacitive Touch Buttons, Sliders and Wheels
– QTouch and QMatrix® Acquisition
– Up to 64 sense channels
 
DIY kit Include:
 
1 x ATmega328p IC Chip
1 x 140pcs Solderless Breadboard Jumper Cable Wire Kit U Shape
1 x 16MHz crystal oscillator
1 x 10 KOhms resistor
1 x 330 Ohms
2 x 22pF capacitors
1 x 100nF capacitor
1 x Tactile push button
1 x testing LED RED
1 x FT232RL FTDI serial adapter module
1 x Half+ breadboard
6 x dupont cable wires M-F
Arduino UNO is NOT included
Did you find apk for android? You can find new Free Android Games and apps.

Reviews

There are no reviews yet.

Be the first to review “ATmega328P DIY arduino Learning Kit FT232RL 22pF 100nF 16MHz crystal mini breadboard”